2d87d9f3548b8e7863047ae95d1cb40d3a6968d4
2 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 karti
|
af0d4a7d57 |
The office keeps its lights on, and something walks around under them
**Lights.** A sited office follows the real sun, and the real sun spends
half its time below the horizon — which was producing a technically
correct and completely useless picture: an unlit floor plate at midnight
in a building whose whole premise is that you can see who is at which
desk. `luminaires.ts` brings the diffusers up as the sun goes down and
reports one scalar for how much interior light there is; `withHouseLights`
adds it to the rig. CONTRACT §4's rule that a fitting emits no light is
kept in full — nothing here is a light source, and the rig still has one
owner.
**And they notice you.** A fitting within four metres of somebody walking
underneath brightens and fades back as they leave, which is what an
occupancy-sensed floor actually does at night. They are one `InstancedMesh`
sharing one material, so `emissiveIntensity` cannot vary between them —
`instanceColor` can, but three multiplies it into the diffuse term only, so
six lines of `onBeforeCompile` carry it into the emissive term as well. The
alternative was one mesh per fitting: forty draw calls of ceiling in a
building that spends about twenty on everything.
**Optimus.** A posable Gen-3 humanoid — eleven articulating joints, pale
shells over a dark frame, a black visor — with a walk cycle driven by
*distance travelled* rather than wall-clock, so the feet do not slide when
a robot slows down. Two per floor, derived from the pack's levels, so the
two-storey tower gets four and the hangar gets two without either pack
knowing robots exist. They wander between reachable points using
`Plan.blocked` — the collider the wall split already produces — and they
are deliberately **not** gated on `depth`: the build-time-exclusion rule is
about occupancy, and a robot is nobody.
**Starlinks stop being pixels.** The sixty-four nearest the centre of view
grow real geometry — a flat bus with ONE large solar array, which is the
actual signature and the thing everybody draws symmetrically and wrong —
fading in so there is no pop where a point becomes a mesh. Two draw calls.
The sun for their attitude comes from `solar.ts` and not from the rig,
because `atmosphere.ts` floors the light direction to keep the shadow
camera usable, and a sun ten degrees *down* is exactly the dusk geometry
that makes a pass visible.
**Aircraft** are airliners now — swept wings, nacelles, a fin — instead of
an arrowhead, still one shared geometry facing +Z as `flights.ts` requires.
**Clouds** drift over the board, driven by observed cover, lit by the rig
rather than by themselves.
Four modules were built by subagents and reviewed by another; every one
came back `needs-work` and the reviews were right. Fixed before wiring:
- The walk cycle's arms were a quarter cycle out of step with its legs —
the legs are cosine-shaped and the arms were on `sin`, so at the
instant the left leg reached full forward the left shoulder was at dead
neutral. Uncanny, and hard to name until it is pointed at.
- Every Optimus shell used a `roundedBox` radius of 0.12–0.22, which that
primitive turns into a near-circular cross-section — the figure was
built out of lozenges, not panels. The rest of the library uses
0.02–0.09.
- The cloud material was `transparent` + `DoubleSide` without
`forceSinglePass`, so three rendered it twice per frame *and* bumped
`material.version` on each pass — rebuilding the program cache key
forever, on the one layer that is fill-rate bound.
- `starlinkMesh.dispose()` freed the geometries but not the
`InstancedMesh`es, orphaning their instance buffers on every city
switch.
- The airliner's tailplane roots sat outside the tail cone and hung in
free air over most of their chord.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
karti
|
06455f7424 |
The office learns where it stands, and the sky stops being a backdrop
**Aircraft actually move now, and the reason they did not is the headline.**
`HttpFlights` holds a frozen snapshot between network refreshes and is
polled at 1 Hz, so a live feed handed the layer the same position five to
fifteen times and then jumped. `span` therefore measured the poll interval
rather than the gap between the two positions that differ, the teleport
test saw an airliner covering 36 units in a "second" against a ceiling of
8, and **every live track's history was wiped on every refresh** — so no
aircraft on the deployed site could ever grow a trail, however long
TRAIL_POINTS was set. Skipping the repeat fixes the motion and the trail
at once. Trails then go to 72 points / 240 s, which is about seventy
seconds of flying.
Three more defects in the same file, found while looking: trail
truncation dropped the segments nearest the aircraft (leaving a streak
with no aeroplane attached), MAX_TRACKS was declared and never enforced,
and one missing target deleted its whole trail. The buffer now uploads
only what it wrote, rather than 46 MB/s of untouched array.
**You can get above the constellation.** Dome to 1.05 board *radii* and
the orbit to 2.0 spans. Radii, not spans: scene space is centred on the
city and the Bay Area board runs forty kilometres down the peninsula, so
the furthest corner is 0.94 spans out where the half-diagonal is 0.65 —
sized off the half-diagonal the dome sat inside its own city. The far
plane goes to 4 spans to stop clipping the sky from off-centre chapters,
and `PointsMaterial` defaults `fog: true`, which was quietly dimming the
whole constellation with the city's haze.
**An office can say where it stands.** `Office.site` — lat, lng, height
above the ground outside, and the compass bearing the pack's −Z points
along — and with one it gets the same sun the city does, a sky, and a
horizon at `-elevation`. CONTRACT §4 reserved this as "a later
refinement"; it is taken up rather than overturned, and `daylight.ts`
computes no light of its own. It does the two things a room needs that a
map does not: turn the sun into the building's frame, and move the fog
outdoors before it greys out the far wall.
Two buildings now, and they are deliberately unalike: Lumbridge HQ 188 m
up a Transbay tower facing 205°, and **Frontier Valley**, a startup in a
hangar at Alameda Point — one room, 54 x 30 m, nine metres to the
trusses, four metres above reclaimed ground.
Floor-to-floor in the reference pack is now 16.8 m: the interstitial is
ten times a real one, so the space between the slabs is somewhere things
can hang. It is frankly not architecture, `PLENUM` is the one number to
change, and the file says so.
Also fixed, all found by review rather than by looking at the screen:
- `sun.shadow.camera.updateProjectionMatrix()` was never called, so
three's default ±5 unit box has been in force this whole time and
every `shadowExtent` this repo passes — including the city's ±752 —
has been silently ignored.
- A missing aircraft was kept alive by the new grace period and *drawn*,
so it froze in mid-air at full opacity for 32 s.
- Frontier Valley's mezzanine was a `Room`, which carries no height: its
slab lay on the concrete, its chairs floated 4.4 m over it, and its
balustrade fenced off a patch of ground floor. It is a `Level`.
- Overlapping floor slabs z-fought. The format permits overlap and
resolves later-first, so `shell.ts` now lifts a slab a hair per
earlier slab it overlaps — and by nothing at all in a pack, like the
reference office, whose rooms only ever abut.
- `switchOffice` bypassed the `entering` guard (leaking a whole scene
per double-click) and tore down the old room before knowing the new
one would load, with no way back.
Known and not fixed: raising MAX_SPAN to 30 s doubles the worst-case
re-base snap when a feed's gap shortens. It is bounded, pre-existing in
kind, and the fix wants carrying the live head into the next leg.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|